Hey there, fellow gamers! Have you ever experienced a malfunctioning Xbox One controller? Perhaps it’s time to give it a little love and care by opening it up and fixing the issue yourself. In this article, we’ll provide you with a step-by-step guide on how to take apart your Xbox One controller. So, grab your tools, and let’s get started!
The Tools Needed
To get started, you will need the following tools:- Small Phillips head screwdriver- Spudger tool or a flat-head screwdriver- Tweezers- Plastic opening tool- A clean, flat surface to work on
Before you start disassembling your Xbox One controller, make sure to take the necessary precautions to avoid any damage. It’s essential to ensure that your controller is unplugged and turned OFF before starting the process. Also, please keep in mind that opening up your controller may void its warranty, so proceed with caution.
Now that you have the necessary tools and precautions in place, we can start the disassembly process.1. Start by removing the battery pack from the back of your controller.2. Locate the five screws on the back of your controller and use your Phillips head screwdriver to unscrew them. Be sure to remember where each screw goes, as they may differ in size.3. Once you’ve unscrewed all five screws, use your plastic opening tool to pry open the back cover of your controller. Be careful not to damage any of the wires connected to the rumble motors.4. Next, use your spudger tool or flat-head screwdriver to carefully disconnect the ribbon cable that connects the battery compartment to the motherboard.5. Remove the four screws that hold the motherboard in place.6. Once you’ve removed the screws, gently lift the motherboard and disconnect the ribbon cable that connects it to the front panel.7. If you need to replace the analog sticks, gently pull them off the front panel.8. Use your spudger tool to pry open the bumpers on the back of the controller carefully.9. Once the bumpers are open, you can remove the screws that hold the triggers and bumpers in place.10. Remove the triggers and bumpers, taking note of how they fit into the controller.11. If you need to replace the D-pad, use your spudger tool to gently pry it out of the front panel.12. If you need to replace the face buttons, carefully pop them out of the front panel using your spudger tool.13. Lastly, if you need to replace the audio jack, use your spudger tool to carefully remove it from the front panel.
Congrats! You’ve successfully disassembled your Xbox One controller, and now it’s time to put it back together. Here’s how:1. Start by reattaching the audio jack to the front panel.2. If you removed the face buttons, carefully place them back into the front panel.3. If you removed the D-pad, gently push it back into the front panel.4. Attach the triggers and bumpers back into place, ensuring they fit correctly.5. Carefully close the bumpers on the back of the controller.6. If you removed the analog sticks, place them back onto the front panel.7. Reattach the ribbon cable that connects the motherboard to the front panel.8. Gently place the motherboard back into the controller and screw it into place.9. Reconnect the ribbon cable that connects the battery compartment to the motherboard.10. Carefully snap the back cover back into place.11. Finally, screw in the five screws on the back of the controller.
– Take pictures of each step to help you remember how to put everything back together.- Label each screw as you remove them to ensure you know where they go.- Be gentle when removing parts from the controller to avoid any damage.- If you’re unsure about anything, refer to online guides or tutorials.
And there you have it, a step-by-step guide on how to take apart your Xbox One controller. Now that you know how to do it, fixing a malfunctioning controller will be a piece of cake. Just remember to take the necessary precautions and be gentle when removing parts. Don’t forget to share this guide with your fellow gamers, and we’ll see you in our next article!