How to Cut a Cigar: A Beginner’s Guide

Greetings cigar enthusiasts! If you’re new to the world of cigar smoking, one of the most important skills you’ll need to master is how to properly cut a cigar. A cigar that is improperly cut can ruin the entire smoking experience, so it’s important to do it right. In this article, we’ll go over the basics of how to cut a cigar, including the types of cutters available, the best places to cut the cigar, and some tips to ensure a perfect cut every time.

Types of Cutters

Before we get into the specifics of how to cut a cigar, let’s first discuss the different types of cutters available. There are three main types of cutters: guillotine cutters, punch cutters, and V-cutters.The guillotine cutter is the most common type of cutter and is often the one included in cigar starter kits. It features a straight blade that is used to slice off the cap of the cigar. The punch cutter, on the other hand, punches a small hole in the cap of the cigar. Finally, the V-cutter creates a wedge-shaped notch in the cap of the cigar.

Where to Cut the Cigar

Once you’ve selected your cutter, it’s time to determine where to make the cut. The cap of the cigar is the part that you’ll be cutting, and it’s important to make sure that you don’t cut too much off. If you cut too much, the cigar will unravel or burn unevenly.The best place to cut the cigar is just above the shoulder, which is the point where the cap starts to round off. This will ensure that the cigar stays intact and won’t unravel during smoking.

The Cutting Process

Now that you know where to cut the cigar, it’s time to actually make the cut. First, hold the cigar firmly between your fingers or in a cigar holder. Next, insert the blade of your cutter just above the shoulder of the cigar. Be sure to hold the cigar steady as you make the cut, as any movement can result in an uneven cut.When using a guillotine cutter, make sure that the blade is completely open before making the cut. This will ensure a smooth, clean cut. With a punch cutter, simply twist the cutter into the cap of the cigar to create a small hole. Finally, with a V-cutter, insert the blade into the cap of the cigar at a 90-degree angle and make the cut.

Some Tips for a Perfect Cut

Now that you know the basics of how to cut a cigar, let’s go over some tips to ensure a perfect cut every time.1. Don’t rush – Take your time when making the cut to ensure that it’s done properly.2. Use a sharp cutter – A dull cutter can result in a jagged cut that can cause the cigar to unravel.3. Don’t cut too much – As mentioned earlier, cutting too much off the cap can cause the cigar to unravel or burn unevenly.4. Practice makes perfect – If you’re new to cigar smoking, it may take a few tries to get the hang of cutting a cigar properly. Keep practicing and you’ll get it in no time!

In Conclusion

Cutting a cigar is a simple process, but it’s important to do it right in order to ensure an enjoyable smoking experience. Remember to select the right cutter, cut the cigar just above the shoulder, and take your time to ensure a smooth, clean cut. With a little practice, you’ll be a pro in no time! Happy smoking!Until next time, stay tuned for more interesting articles!